HEIDENHAIN SW 68894x-03 - Manual (Page 486)

486 Graphic simulation
6.1 Simulation mode of oper
a
tion
The miscellaneous functions
You use the miscellaneous functions to select the simulation
window, to determine how the tool path is depicted, or to call the time
calculation.
The tables provide you with an overview of the menu and soft-key
functions.
 In the Machine modes of operation, an activation of the
Single Block
soft key is also effective in automatic
mode.
 In the Machine modes of operation, you can start
automatic program run directly from the simulation by
pressing Cycle on.
Soft keys for the miscellaneous functions
Switches between wire-frame
graphics and cutting-path graphics.
Switches between light-dot and
cutting-edge view.
Activates the 2-D material-removal
graphic.
Selects the view.
Switches the focus to the next
window (siehe „Multiple window
view” auf Seite 488).
Overview of the "miscellaneous functions" menu
Selects the simulation window (siehe „Simulation
window” auf Seite 487).
Activates a startup-block search (siehe „Simulation
with mid-program startup” auf Seite 495).
Calls the time calculation (siehe „Time calculation”
auf Seite 497).
Switches between the large and the small simulation
window (siehe „Using the graphic simulation” auf
Seite 485).
Switches between the single and multiple window
display (siehe „Multiple window view” auf
Seite 488).
Saves the contour (siehe „Saving the contour” auf
Seite 498).