Grass Valley Prelude v.3.0 - Manual (Page 79)

Prelude — Instruction Manual 79
48B Control Panel
Auto Level Latching
The Auto Level Latching permits control of the breakaway state for a Des-
tination after a Take.
• When the Auto Level Latching flag is checked (on), the current
enabled/disabled level states are retained and applied to subsequent
takes for the currently active Destination. Selecting a different Destina-
tion cancels the breakaway.
• When the Auto Level Latching flag is off, all levels of the currently
active Destination are enabled after a Take or change of active Destina-
tion, irrespective of the previous level enable states(s).
Auto Tally
The panel buttons will tally the first available level for each Destination.
Backlight
Enables/disables the backlight feature for the control panel buttons.
Dst Change Lock
Enables/disables Destination changes from the control panel.
Flashing LED Indication
The Protect button will flash when the panel is the owner of an applied
Lock-Protect. The Level Select buttons will flash if the Source connected on
the assigned Level is different than the Tally Level (a breakaway). Owned
Locks and Protects tallies will flash.
Force Unlock/Unprotect
Allows the control panel to forcibly remove a Lock or Protect regardless of
the point of control that initiated the Lock or Protect.
Hard Lock
Allows the control panel to prevent Destination changes by all control
points including the initiating panel. Only the initiating control panel, or a
panel with Override or Force capabilities, can remove a hard lock. The Pro-
tect, Hard Lock and Soft lock flags are mutually exclusive. Locks and Pro-
tects are applied to all configured levels.
Hold Breakaway
When enabled, the panel will retain Level breakaway settings even when
new Destinations are selected. Note that if the user presets Levels and