Grass Valley Prelude v.3.0 - Manual (Page 58)

58 Prelude — Instruction Manual
Section 2 — Installation and Initial Setup
XY and PMB Panel Configuration for Salvos
XY and PMB panels have displays that permit scrolling through available
items, including salvos. These panels can therefore access any salvo.
Because salvos have far-reaching effects, by default all salvos are excluded
on PMB and XY panels. This shields the Prelude system from accidental
disruption during initial panel configuration. You must edit the Salvo
Exclusion set on these panel types before salvos can be executed with them.
Edit Salvo Exclusion Set
1. Go to the Prelude UI configuration page of the panel type desired by
clicking on its tab.
2. Either Load an existing panel configuration file, or Get a configuration
from a panel.
3. Click on the Salvo Exclusion button at the bottom of the screen. This
brings up the Salvo Exclusion Set menu ( Figure 44 ).
Figure 44. Salvo Exclusion Set Menu
4. Uncheck the salvos you wish to make available for use on that panel.
You can use the
Exclude All or Exclude None buttons to change the state of
all the salvo items.
5. Click Save As and save the Salvo Exclusion set with a descriptive name.
This exclusion set can then be used for other panels.
6. Click Send Panel Config to Control Panel and select the appropriate control
panel(s) to receive the configuration file.