Grass Valley Prelude v.3.0 - Manual (Page 33)

Prelude — Instruction Manual 33
Software Installation and Network Configuration
System Identifier
If your Prelude system must run on a network shared by an Encore system
or other separate Prelude or Acappella systems, you can isolate them from
one another by assigning different ports for each system. This can be
accomplished using the
System Identifier controls on the Network Configura-
tion web page ( Figure 17 ).
Figure 17. Concerto Network Configuration Page, with System Identifiers
System Identifier for Single Systems
Leave the System Identifier setting to Default for all devices of a Prelude
system running on its own network.
System Identifier for Concerto Frames on a Shared Network
On a Concerto frame web page, the System Identifier controls are displayed
when a system type of
Prelude is selected, and are hidden if Encore is selected.
The easiest way to isolate multiple systems is to assign one of the System
Identifier buttons (Default, 1 - 5) to all the components of the first system,
and then assign a different button to all the components of the next system.