Grass Valley Prelude v.3.0 - Manual (Page 24)

24 Prelude — Instruction Manual
Section 2 — Installation and Initial Setup
Different views of the devices are available, one or more of which can be
displayed with the
IP View , Device View , and Facility View tabs. In this manual
we will use the IP view in all the examples.
The right portion of the screen is the web browser view. When you click a
device on the left, the home page for that device is displayed in the web
browser view.
Pressing the Discover tool bar button initiates a discovery that updates the
information on the left side of the screen. NetConfig remembers discovered
devices and reports their current status. If communication to a device is
lost, the icon for it is colored red.
Another useful discovery tool is available by clicking the Options tab. The
Clear Views and Re-discover button updates the information for only currently
communicating devices ( Figure 7 ).
Figure 7. Option Tab, Clear Views and Re-discover Button
The Set IP tab is used to set IP addresses of devices on the network, and the
Load SW tab is used to load software to the devices. The use of these two fea-
tures with Prelude are described later in this manual.
Refer to the separate NetConfig Instruction Manual for more detailed infor-
mation.