Grass Valley Prelude v.3.0 - Manual (Page 36)

36 Prelude — Instruction Manual
Section 2 — Installation and Initial Setup
4. Drag a board on the left to the level you want to use to control it on the
right. Data for that board will be automatically filled in (
Figure 18 ).
Figure 18. Concerto Level 1
5. If you want to control another adjacent board of the same type with the
same level, just drag its icon to the same level. Or, if you want to divide
the control of a single board between two levels, drag the same board
icon a second time to a different level.
6. Assign all the remaining boards installed in the Concerto frame to the
desired levels (
Figure 19 ). Level names are entered automatically. If you
edit them, each level must have a unique name.