Grass Valley Prelude v.3.0 - Manual (Page 77)

Prelude — Instruction Manual 77
48B Control Panel
Low Tally Brightness
Specifies the brightness of the panel low tally display within a range from
0 to 9. Zero is darkest, 9 is brightest.
Button Blink Rate
Specifies the rate of blinking buttons. Default value is 10. 1 is very fast, 50
(max value) is extremely slow.
Default Dst/Dst Page
Selects the default Destination selected after a panel reset.
Default Tally Level
When several Levels are available for this configuration, this field is used
to choose which Level will display Tally.
Level Exclusions
Opens a configuration window ( Figure 60 ) allowing the selection of levels
to exclude from control by that panel. At least one level must remain un-
excluded. Exclusion sets can be saved for reuse.
Figure 60. Level Exclusions