Grass Valley Prelude v.3.0 - Manual (Page 50)

50 Prelude — Instruction Manual
Section 2 — Installation and Initial Setup
Refer to Section 3-Configuration Reference for information about Attributes
and Flags and the differences between the various Encore panel types.
Send Panel Configuration to Each Panel
The appropriate control panel configuration file now must be sent to each
control panel.
1. Click on the Load Panel Config from File... button, select the appropriate
panel configuration and click Load .
2. Now click on the Send Panel Config to Control Panel... button. A selection
pane listing all the available panels of that type will appear ( Figure 39 ).
You can select a single panel, or if a group of panels share the same
functionality you can select just the ones you want using standard
Windows methods (
Shift for adjacent items, Ctrl for individual items).
Figure 39. Control Panels Selected to Receive Panel Configuration File.
Note All Acappella remote panel types will be displayed (8x1, 16x16, etc.). You
should select only panel(s) that match the configuration type you have
created before you send the configuration to Acappella panel(s).
3. Make sure the Re-Boot when complete box is checked, and click OK . The
panel configuration files will be sent to the selected panels in turn.