Grass Valley Prelude v.3.0 - Manual (Page 31)

Prelude — Instruction Manual 31
Software Installation and Network Configuration
Prelude Registration
If the Prelude control system is not registered, the following prompt
appears the first time you click on the Prelude tab.
Figure 12. Unregistered Message
When Prelude is not registered, you will not be able to Get or Send router
or control panel configuration files from or to the Prelude control panels.
The Prelude control system plug-in is activated with a license key. Each
license key is valid for an individual PC, and is generated based on the
Device ID of that specific PC. You will need to determine the Device ID of
your PC and provide that exact number to Grass Valley Sales. They will
then generate the key and send it to you. Entering this key into NetConfig
will activate the Prelude configuration functionality on that PC.
The complete procedure to register your Prelude control system consists of
the following steps:
1. With NetConfig installed on the PC you intend use with Prelude, click
on the Prelude tab. Click
OK if the Unregistered Message ( Figure 12 ) is
displayed. The Prelude User Interface (UI) is then shown ( Figure 13 ).
Figure 13. Prelude User Interface
About
Prelude
Button