Grass Valley Prelude v.3.0 - Manual (Page 56)

56 Prelude — Instruction Manual
Section 2 — Installation and Initial Setup
3. Click New to create a blank spreadsheet for the salvo. The number and
type of levels will be derived from the loaded router configuration.
4. Right click on Destinations cells and choose which Destinations will be
included in the salvo.
5. Right click on Levels cells and populate them with the desired Sources.
You can pick the Sources from a list, or you can choose Fill diagonally for
the Selected Destinations to quickly fill all the levels with regularly
numbered Sources ( Figure 42 ).
Figure 42. Prelude System Salvo Configuration Screen
6. When done editing the salvo, click Save and give the salvo a descriptive
name (maximum 8 characters).
7. Repeat Step 3 through Step 6 to create all the salvos you will want to
use on your system.
8. Click Send Router Config to Control Panel, select all the control panels, make
sure the Re-Boot when complete box is checked, then click OK . This will
make the salvo available to all panels, but each panel still needs to be
configured to be able to use the salvo.
9. Back up the router configuration file to your PC by clicking on Save
Router Config to File and either overwrite the existing file or give it a new
descriptive name.