Grass Valley Prelude v.3.0 - Manual (Page 26)

26 Prelude — Instruction Manual
Section 2 — Installation and Initial Setup
Label Each Device’s IP Address
When all devices have unique IP addresses, it can be extremely helpful to
label each device with its currently assigned IP address. Removable adhe-
sive labels are recommended, since the IP address may be changed in the
future.
Identifying Control Panels
To identify a specific control panel when several are connected at once, you
can right click on the device name in NetConfig and choose
Identify Device .
That panel’s front panel buttons will blink on and off alternatively.
Touching any front panel button restores normal button tally.
Alternatively, to identify a panel you can send it a reset command and see
which one’s front panel buttons all go off and back on.
Name Devices
You can give the Prelude components descriptive names, if you wish. This
can be helpful during configuration, especially for control panels which
may be located at different locations that require different configurations.
Devices are named using that device’s web page.
1. In NetConfig, select the device you wish to name on in the left pane,
then click on
Panel System or Matrix System (depending on device type).