Saving and loading crosspoint states – Grass Valley UniConfi NVISION Series v.2.0 User Manual
Page 99
89
UniConfig
User’s Guide
•
LPR
—
the “lock, protect, release” status of the output. An L in the field indicates that the out-
put in that row is locked. A P indicates that the output is protected. A blank field means that
there is no lock or protect on that output.
•
Status
—
indicates whether a port is tristated (i.e., disconnected) or, if the port is in use,
whether it is “controlled” or “controlling.”
Saving and Loading Crosspoint States
You can create a “snapshot” of the current crosspoint matrix state that can be saved for loading
at a future point. This snapshot is called a “salvo.” (These salvos are not the same as NV9000
system salvos.) For more information, see
If you enable salvos, a salvo pane appears in the ‘Connections’ window, at the right of the cross-
points list:
The salvo pane has an ‘Execute’ button. If the salvo is not empty, pressing the ‘Execute’ button
causes the crosspoint connections defined in the salvo to be moved to the crosspoint matrix of
the router. The crosspoint list of the window is updated accordingly.
You can modify the entries in the salvo pane in several ways. See
Added
Salvo
Pane