Grass Valley UniConfi NVISION Series v.2.0 - Manual (Page 157)

147
UniConfig
User’s Guide
In NV9000-SE Utilities
1 Define the audio router and its two physical levels so that they match UniConfig:
(In this NV9000 configuration, an HD router was also defined, but it is not shown.)
2 Create virtual levels if none available have suitable names. In this configuration, we created
two: “AES” for stereo and “MONO” for mono:
It is a 2-step process. First add the virtual levels to the virtual level table. Then, assign a signal
type to the virtual level in the virtual level bindings table. The signal types are ‘AES/EBU’ (ste-
reo) and ‘AES mono’.
Virtual Level Table
Virtual Level Bindings Table
1
2