Grass Valley UniConfi NVISION Series v.2.0 - Manual (Page 102)

92
Connections Window
Setting Connection Window Options
Broadcast mode allows you to perform broadcast takes in the ‘Configuration’ window. See
Broadcasting Machine Control Signals on page 79
‘Other’ Tab
There are two check box options in this tab:
Show Take Buttons on Connection Dialog
When you check this check box, a ‘Diagonal Take’ button and a ‘Range Take’ button appear in
the ‘Connections’ window.
When you leave the check box unchecked, you must use the ‘Actions’ menu — or a context
menu — to perform a diagonal take or a range take.
Enable Output-Follow Takes
If you have defined an output follow partition for the selected control card and you check this
box, the ‘Connections’ window treats the crosspoint list as an “output follow” crosspoint matrix.
Fields in the window change and the status fields indicate where a “follow” occurs.
If your control card has no output follow partition, this option is not present in the dialog.
See Output-Follow Takes on page 103.