Grass Valley UniConfi NVISION Series v.2.0 - Manual (Page 26)

16
UniConfig Basics
Configuration Options
4 From the ‘Tools’ menu, choose ‘Options’. The ‘Configuration Options’ dialog appears:
5 Check the ‘Show advanced Serial EE settings’ check box. By default, this box is not checked.
When it is checked, additional options appear:
6 Check the ‘Display diagnostic screen during updates’ check box. The next time you click
Write All, a ‘Serial EE Write Status’ dialog shows the status of the data being written to the
control card.
7 Click OK to save changes and close the dialog. Or, click Cancel to close the dialog without
saving changes.