Grass Valley Kalypso Installation Planning Guide - Manual (Page 82)

82 Kalypso Installation Planning Guide
Section 4 — Kalypso HD Frame
Figure 76. Example Topography Requiring a Twenty Port Ethernet Switch
Standard System Components Ports Required Number of Components
Frame 1 x =
Main Control Panel 1 x =
Local Auxiliary Panel 1 x =
Menu Panel 1 x =
Kalypso Options
Facility Intranet 1 a
a No port required if option not installed.
x =
32-Crosspoint Remote Aux Panel Hub 1
a
x (# of Hubs) =
Kalypso Machine Control Option
Profiles (Direct to Switch)
b
b Connect devices directly to the Kalypso switch in small systems which have no other Omnibus components
( Figure 74 ).
1
a
x =
Profiles (Hub or Switch)
c
c An existing system will typically have a switch or hub which connects all Serial Engines, Profiles and Machine Control
system control panels and managers. Use an Uplink port on the Machine Control switch to make the switch-to-switch
or switch-to-hub connection. Alternatively, one port on the switch can be connected to the Kalypso switch (
Figure 76 ).
1
a
=
Existing Omnibus System (Hub or Switch) c 1 a =
Total Number of Ports Required:
Serial
Engine
VTR
Serial
Engine
VTR
Serial
Engine
VTR
Profile Profile Profile Profile Profile Profile
Existing Ethernet Hub or Switch (e.g., Omnibus LAN)
Ethernet
Hub1
32-XPT Remote
Aux Panel
(Option)
32-XPT Remote
Aux Panel
(Option)
32-XPT Remote
Aux Panel
(Option)
32-XPT Remote
Aux Panel
(Option)
Ethernet
Hub1
Ethernet
Switch
0619_08_82r0
Local Aux Panel
Main Panel
Real Time Processor
Menu Panel
Windows Processor
Local Aux Panel
Main Panel
Real Time Processor
Menu Panel
Windows Processor
Local Aux Panel
Main Panel
Real Time Processor
Menu Panel
Windows Processor
Kalypso HD
Video Processor Frame
Still Store
Frame CPU
1 Use hubs to exceed 100 m (328 ft.) cable limitations.
10BaseT Facility LAN
100BaseT Facility LAN 10/100BaseT Facility Intranet
8 Port Ethernet Switch
(6 external ports and
2 internal ports)
PC running Kalypso
Application
Windows Processor
Ethernet
Hub1