beautypg.com

Kalypso hd and duo systems – Grass Valley Kalypso Installation Planning Guide User Manual

Page 12

background image

12

Kalypso Installation Planning Guide

Section 1 — Introduction

Kalypso HD and Duo Systems

Table 4. Kalypso HD and Duo General Specifications

Power

Video Processor Frame
Power Supply

Power

Consumption

100-125 VAC or 200-250 VAC autorange, 50-60 Hz power factor corrected

900 W (typical), 1200 W (maximum)

Main Panel
Power Supply

Power

Consumption

100-125 VAC or 200-250 VAC autorange 50-60 Hz power factor corrected

4-M/E: 600 W (typical), 800 W (maximum) 2-M/E: 600 W (maximum)

Local Aux Panel
Power Supply

Power

Consumption

100-125 VAC or 200-250 VAC

Usually powered through Main Panel, 50 W if powered externally.

Environmental

Temperature Range

Frame, Local Aux
Panel, Menu Panel

Ambient temperature for specifications: 20º to 30º C (68º to 86º F)
Ambient temperature for operation: 0º to 40º C (32º to 104º F)

Main Control Panel

Specification: 20º to 30º C (68º to 86º F)
Operational: 0º to 35º C (32º to 95º F)

Relative Humidity

Up to 95% (non-condensing)

Vibration

ASTM D 4728 Fig X1.1, table X1.1, Truck Profile

Table 5. Kalypso HD and Duo System Video Specifications

Video Standards

HD Mode

SD Mode

1080i 29.97/30

SMPTE 274M Table 1-4, 5

525i 59.94

SMPTE RP-259M

1080i 25

SMPTE 274M Table 1-6

625i 50

SMPTE RP-259M

1080p 24/23.976

SMPTE 274M Table 1-10, 11

1080sF 24/23.976

SMPTE RP211 Table 1-15, 16

720p 60/59.94

SMPTE 296 Table 1-1, 2

Video Inputs and Outputs

Number of Inputs

90 non-looping
(15 standard, up to 90 total in 15 input option increments)

Number of Outputs

24 for 2-M/E, 48 for 4-M/E

Type of Connectors

75 ohm BNC

Number of Bits

10

Serial Digital Video Input

Nominal Amplitude

800 mV peak-to-peak terminated

Return Loss

> 15 dB, 5 MHz to 1.5 GHz

Ancillary Data

User Selectable

Blanked or Passed

Aux Buses

Always passes ancillary data

PGM A-D

Blank or pass ancillary data from any input (Background source and
blank/pass independent for all four)

Preview A-B

No ancillary data

Input Impedance

75 ohm

Maximum Cable Length Equalized (Belden 1694 type) 100 m (328 ft)