Grass Valley Kalypso Installation Planning Guide - Manual (Page 37)

Kalypso Installation Planning Guide 37
Optional System Components
Optional System Components
Remote Aux Panels
Remote Aux panels control Kalypso aux buses from remote locations.
Three 24-Crosspoint and two 32-Crosspoint Remote Aux panel configura-
tions are available for Kalypso systems. Refer to
Table 7 and the following
sections for panel-specific information.
Remote aux panels may be purchased with the Kalypso system or added at
a later time. For more information on Kalypso options, refer to the Kalypso
Ordering Guide or the Grass Valley Group Full Line Product Catalog. Online
documentation is available on the Grass Valley Group web site. The URL
for the Grass Valley Group web site is found on the copyright page at the
front of this manual.
Note Remote Aux panels used with Model 2200, 3000, and 4000 systems can be
upgraded to 24-Crosspoint functionality for use in a Kalypso environment.
See the Kalypso Model 4000 Remote Aux Panel Upgrade Instruction Manual
for details.
24-Crosspoint Remote Aux Panels
These panels are designed to select 48 external sources (24 unshifted and 24
shifted). Up to Thirty-two 24-Crosspoint Remote Aux panels can be daisy-
chained on a single serial control port on a Kalypso Video Processor frame.
Three panel configurations are available, identified by the number of rack
units (RUs) each occupies in a standard 19 in. (483 mm) equipment rack
(see
Figure 37 through Figure 39 ). The 1 and 2 RU panels (KAL-24AUX1
and KAL-24AUX2) are dedicated to a single bus. The 3 RU panel
(KAL-24AUX3) panel has 18 bus delegate buttons. All three panels have the
same connectors and DIP switches as that depicted for the KAL-24AUX1 in
Figure 40 on page 38 .
Table 7. Remote Aux Panel Summary
24-Crosspoint Aux Panel 32-Crosspoint Aux Panel
Connection Serial Port Daisy Chain Ethernet
Maximum Panels
a
a A maximum of 40 Remote Aux panels, in any combination, can be connected to a 4-M/E or 2-M/E.
32 40
External Sources Controlled 48 (24 unshifted, 24 shifted) 64 (32 unshifted, 32 shifted)
Available Configurations
KAL-24AUX1 (1 RU, single bus) KAL-32AUX1 (single bus)
KAL-24AUX2 (2 RU, single bus) KAL-32AUX2 (16 bus delegate buttons)
KAL-24AUX3 (3 RU, 18 bus delegate buttons) --