Cosmetic bracket, Sole, but it may also be surface mounted, Figure 6 – Grass Valley Kalypso Installation Planning Guide User Manual
Page 18
18
Kalypso Installation Planning Guide
Section 2 — Kalypso Control Surfaces
Figure 6. Main Panel Mounting Options, Front Left View
The Main panel lid is held in the open position by two gas spring assem-
blies. The ability of these devices to support the lid is compromised if the
installed panel tilts toward the user at an angle greater than 15 degrees.
Panel ventilation is accomplished by two fans which draw air through slots
around buttons and expel it at the rear of the panel, where connections to
the Kalypso Video Processor frame and other Control Surface components
are located.
Cosmetic Bracket
4-M/E and 2-M/E systems manufactured since March 2001 are shipped
with a cosmetic bracket attached to the rear of the Main panel lid (
The purpose of the cosmetic bracket is to cover a visible gap between the
rear of the panel and the mounting surface when the panel is flush
mounted. The cosmetic bracket is removable (see the Kalypso Installation
and Service Manual for details) and can be ordered for older systems. It is
recommended the bracket be removed if the Main panel is surface
mounted.
Mounting Flange
0.43 in. / 11 mm
0619_04_28_r3
Panel Tub
Panel Lid
Surface Mount
Flush Mount
Console to tub Clearance
0.49 in. / 12 mm
Console
.8125 in. / 21 mm
(typical)
Panel Tub
Panel Lid
Support Member
Support Member
1.03 in. / 26 mm
Mounting Option
Cutout Dimensions
A
a
a
Console surface cutout.
B
1
C
b
b
Distance between flush mount support members.
2-M/E
4-M/E
2-M/E
4-M/E
2-M/E
4-M/E
Flush Mount
c, d
c
Recommended tilt of 5˚; maximum tilt of 15˚. The recommended five degree tilt may be obtained by elevating the rear of the panel
approximately two inches relative to the front of the panel.
d
(below) for additional flush mount considerations.
20.09 in.
(510 mm)
25.06 in.
(637 mm)
49.51 in.
(1258 mm)
55.63 in.
(1413 mm)
48.66in.
(1236 mm)
54.78in.
(1391 mm)
Surface Mount
3
18.70 in.
(475 mm)
23.81 in.
(605 mm)
48.66in.
(1236 mm)
54.78in.
(1391 mm)
n/a
n/a
B
C
A