Cables provided, Lan requirements – Grass Valley Kalypso Installation Planning Guide User Manual
Page 56
56
Kalypso Installation Planning Guide
Section 3 — Kalypso Classic Frame
Cables Provided
The following cables are provided with a standard 4-M/E Kalypso Classic
system. All Ethernet components must be supplied by the customer.
Cables provided with the 2-M/E Kalypso Classic system are identical to
those supplied with the 4-M/E system, except Local Aux cabling is pre-
installed inside the 2-M/E Main panel tub. Local Aux cable connections are
located on the rear of the 2-M/E Main panel.
LAN Requirements
The Kalypso Classic system requires an Ethernet Local Area Network
(LAN). The Video Processor frame, Main panel, Local Aux and Menu
panels, Still Store option, 32-Crosspoint Remote Aux panels and external
Machine Control devices are all connected via an appropriately sized
Ethernet switch (refer to
,
and
).
CAUTION Ethernet hubs are not acceptable for the main Kalypso Ethernet interconnect.
Use of a hub instead of a switch may cause sluggish responses to panel
button presses and erratic lever arm motion. Connect all Kalypso nodes to the
same switch to avoid sluggish or erratic response. An existing facility
Ethernet switch (not hub) can support Kalypso if an adequate number of
ports are available. Keep your facility network and technical network separate
in order to avoid network traffic negatively affecting Kalypso system opera-
tion.
Table 13. Supplied Cables
Cable Description
Quantity
Part
Number
Power Supply AC line cord
AC line cord kit
1
Power Supply to Frame DC supply cable
DC power cable
1
Main Panel AC line cord
AC line cord kit
1
650-4175-XX
Main Panel to Local Aux Panel DC power
a
a
Pre-installed inside each 2-M/E Main panel
8-pin DIN, male-to-male, 2 ft. (0.6 m)
1
174-4447-00
Main Panel to Menu Panel DC power
8-pin DIN, male-to-male, 10 ft. (3 m)
1
174-4447-10
Menu Panel to ZIP 250 USB
USB A to B, 6 ft. (1.8 m)
1
174-8160-00
Menu Panel to External CD-ROM USB
b
b
Included only with Flush Mount Bracket kit.
USB extension male A to female A (1.8 m)
1
174-8168-00