Grass Valley Kalypso Installation Planning Guide - Manual (Page 22)

22 Kalypso Installation Planning Guide
Section 2 — Kalypso Control Surfaces
2-M/E Main Panel
Source ID displays are standard on the 2-M/E Main panel’s M/E 1 and
PGM/PST buses and on the Local Aux subpanel. A redundant power
supply is optional. Refer to
Figure 13 , Figure 14 , and Figure 15 .
Figure 13. 2-M/E Main Panel Dimensions
Figure 14. 2-M/E Main Panel, Rear View
CAUTION Regardless of mounting method or cutout dimensions, ensure that there is
at least 152 mm (6 in.) of clear space at the rear of the Main panel below the
mounting surface for proper cable clearance and air flow. Allow an extra
203 mm (8 in.) to 254 mm (10 in.) of mounting surface behind the Main
panel for peripheral components.
19.0 in.
483 mm
(lid)
49.31 in. / 1252 mm (lid)
48.54 in. / 1233 mm (tub)
18.45 in.
469 mm
(tub)
8.13 in.
207 mm
(tub to top
of lid)
0619_04_50_r4
8162_00_04_r0
Aux Panel
Diagnostic Emergency
Bypass
Mixer
Emergency
Bypass
Router
Menu Panel
Power
Local Aux Bus
Power
AC In
LAN Redundant
DC Power In
Panel
Diagnostic
Panel
LAN
Satellite Control
Panels (12)
Not
Used