Grass Valley Kalypso Installation Planning Guide - Manual (Page 79)

Kalypso Installation Planning Guide 79
Kalypso HD System Control Cabling
Cables Provided
The following cables are provided with a standard 4-M/E Kalypso HD
system. All Ethernet components must be supplied by the customer.
Cables provided with the 2-M/E Kalypso HD system are identical to those
supplied with the 4-M/E system, except Local Aux cabling is pre-installed
inside the 2-M/E Main panel tub. Local Aux cable connections are located
on the rear of the 2-M/E Main panel.
Kalypso HD LAN Requirements
Kalypso components rely primarily on Ethernet switches for LAN inter-
connects. The Kalypso HD Video Processor frame contains a built-in 8 port
Ethernet switch (6 external ports and 2 internal ports for the Frame CPU
and the Still Store) providing convenient connections for system compo-
nents. The built-in switch automatically senses Ethernet cable wiring, so
there is no need to use crossover cables. Remote Aux panels may be con-
nected directly to the internal Video Processor frame switch, or through an
external Ethernet switch or hub. A hub is required only if there is a need to
exceed 100 m (328 ft) between the system component and Video Processor
frame (refer to
Figure 75 and Figure 76 ).
Note The number and type of components in your Kalypso system determines the
size of any additional switches (number of ports) required. Refer to the fol-
lowing examples of system topography and the accompanying worksheet to
determine the number of ports required for your system.
Table 24. Supplied Cables
Cable Description Quantity Part Number
Power Supply AC line cord AC line cord kit 1
Power Supply to Frame DC supply cable DC power cable 1
Main Panel AC line cord AC line cord kit 1 650-4175-XX
Main Panel to Local Aux Panel DC power
a
a Pre-installed inside each 2-M/E Main panel
8-pin DIN, male-to-male, 2 ft. (0.6 m) 1 174-4447-00
Main Panel to Menu Panel DC power 8-pin DIN, male-to-male, 10 ft. (3 m) 1 174-4447-10
Menu Panel to ZIP 250 USB USB A to B, 6 ft. (1.8 m) 1 174-8160-00
Menu Panel to External CD-ROM USB
b
b Included only with Flush Mount Bracket kit.
USB extension male A to female A (1.8 m) 1 174-8168-00