Grass Valley Kalypso Installation Planning Guide - Manual (Page 81)

Kalypso Installation Planning Guide 81
Kalypso HD System Control Cabling
Connecting Kalypso to An Existing LAN
The Kalypso system can be connected to an existing LAN in your facility
(e.g., Omnibus LAN), in a number of different ways depending on the
number of system components, the existing network structure, and the
needs of the user.
In the example in Figure 75 , the Kalypso system components are connected
to an external 8 port switch then interface to the Video Processor frame
internal switch and the existing LAN.
Figure 75. Example Topography Requiring an Eight Port Ethernet Switch
In Figure 76 on page 82 , a more complex network is illustrated requiring
multiple switches and/or hubs.
Profile
Hub or
Switch1
Profile
Serial
Engine
VTR
Ethernet
Hub1
32-XPT Remote
Aux Panel
(Option)
32-XPT Remote
Aux Panel
(Option)
32-XPT Remote
Aux Panel
(Option)
32-XPT Remote
Aux Panel
(Option)
Facility Intranet
8 Port
Ethernet
Switch
0619_08_81r0
1 Use hubs to exceed 100 m (328 ft.) cable limitations.
10BaseT Facility LAN
100BaseT Facility LAN 10/100BaseT Facility Intranet
Local Aux Panel
Main Panel
Real Time Processor
Menu Panel
Windows Processor
Local Aux Panel
Main Panel
Real Time Processor
Menu Panel
Windows Processor
Kalypso HD
Video Processor Frame
Still Store
LAN 7 - Internal
Frame CPU
LAN 8 - Internal
Built-in 8 Port
Ethernet Switch
(6 external ports/
2 internal ports)
Ethernet
Hub1
Ethernet
Hub1