Grass Valley Kaleido-X (7RU) v.7.70 User Manual
Page 86
74
Kaleido-X (14RU) Expansion
Recovering an Expansion Frame
11 Click Save, and then click Apply settings in the sidebar.
Frame B automatically reboots (this should take about two minutes).
12 When Frame B has finished rebooting, re-insert the front panels of the KXO cards in
slots A and B (if present).
13 Open XAdmin using the new Frame IP Address you assigned in
14 Verify that Frame B is working correctly, and that there are no errors reported on the
Status and Options page.
At this point, Frame B is operating independently, but using its own copy of the
expansion system database. You can now:
• join another frame to Frame B in an expansion configuration
or
• modify/replace the Frame B database so that it corresponds to the standalone
operation of the frame (refer to the procedures described on
If the initial condition that caused Frame A to fail is resolved, and you wish
to return the expansion frame to its original state:
• Power down both Frame A and Frame B.
• Insert the KXO-EXP cards and reconnect the expansion cables.
• Power up Frame A then Frame B.