Grass Valley Kaleido-X (7RU) v.7.70 - Manual (Page 33)

21
Kaleido-X (7RU)
Hardware Description & Installation Manual
Front Card-Edge Indicators
The following LED status indicators are visible on the output cards’ front edge:
KXO-HDM Indicator
One LED indicator is located on the optional KXO-HDM mezzanine:
Front Card-Edge Controls
Two buttons are located on the output cards’ front edge:
LED label LED color Interpretation
Card status Green
Orange
Red
Flashing red OK
Warning
Configuration failed
Firmware upgrade in progress
CPU status Off
Orange
Flashing Green
Green
Flashing Red Card is powered off
OS is booting up
Kaleido-X Software is starting
Kaleido-X Software is up and running
Software upgrade in progress
DVI 1 Off
Green
Orange No input
DVI input detected on Head 1
Test
DVI 2 Off
Green
Orange No input
DVI input detected on Head 2
Test
LTC 1 Green
Red Valid LTC signal at LTC 1 input
No LTC signal or invalid signal at LTC 1 input
LTC 2 Green
Red Valid LTC signal at LTC 2 input
No LTC signal or invalid signal at LTC 2 input
LTC 3 Green
Red Valid LTC signal at LTC 3 input
No LTC signal or invalid signal at LTC 3 input
LED color Interpretation
Green
Red
Flashing red
Yellow System OK
Configuration failed / Safe mode
Programming
Programming mode
Button label Function
Bypass Toggle the display of video on the DVI-D outputs
CPU ON/OFF Reset the card