Grass Valley Kaleido-X (7RU) v.7.70 - Manual (Page 23)

11
Kaleido-X (7RU)
Hardware Description & Installation Manual
KXA-PSU-7 removal
KXA-PSU-7-B removal
Installing a Power Supply
To install a power supply
1 Position the supply in front of an empty power supply slot in the top front of the frame,
with the connector end towards the frame.
2 Slide the power supply into the empty slot, moving it gently until it contacts the
sockets at the rear of the slot.
3 Push firmly but gently on the power supply handle until the power supply's connectors
have mated with the frame's sockets, and the power supply will go in no further.