Grass Valley Kaleido-X (7RU) v.7.70 - Manual (Page 38)

26
Kaleido-X (7RU) Installation
GPI/Genlock Card
Indicators
The following LED status indicators are visible on the front edge of the GPI/Genlock card:
Controls
One button is located on the front card edge of the GPI/Genlock card:
All other adjustment, alignment and configuration of this card are accomplished using
external controllers (e.g. the XEdit software), and are documented in their respective
manuals.
LED label LED color Interpretation
Card status Green
Red
Blinking Red OK
Configuration failed
System upgrade in progress
Reference input
status Green
Off
Red
Orange OK
No input
Signal not recognized
Frame rate not supported
Button label Function
Reset Reset the FPGA and restart the card—for
maintenance use
Status LEDs
Card
Reference IN
Reset
Button