Grass Valley Kaleido-X (7RU) v.7.70 - Manual (Page 22)

10
Kaleido-X (7RU) Installation
Power Supplies
Access the power supplies by opening the front door of the frame. The two power supplies
are located at the top, above the card slots. Viewed from the front of the frame, PSU A is
located on the left-hand side, and PSU B is located on the right-hand side.
KXA-PSU-7 power supplies on a KXA-FR7 frame
KXA-PSU-7-B power supplies on a KXA-FR7-B frame
The KXA-PSU-7-B power supply model has three LED indicators:
Removing a Power Supply
To remove a power supply
1 Open the front door of the frame and locate the two power supplies at the lower right
side.
2 Undo the threaded fastener at the upper right side of the supply to be removed.
3 Pull on the bracket holding the fastener; it rotates down and becomes a handle for
pulling the power supply out of its slot.
PSU A PSU B
Spring-loaded fasteners
PSU A PSU B
Spring-loaded fasteners
AC good (green)
DC good (green)
Fault (red)