Grass Valley iRouter v.6.01 - Manual (Page 85)

iControl Router
User Guide
81
Figure 4-12: Right pane of Router Manager Configurator (physical router level settings)
c) Modify the level settings as required.
4. Click Save.
Removing Physical Routers
To remove a physical router
1. In the RouterManager folder, select the Physical routers sub-folder.
Note: Although it is possible to perform the following procedure as a stand-alone
task (assuming all stated requirements are met), Miranda recommends you
familiarize yourself with the sample workflow on
page 60 in which this procedure is
only one step within a sequence.
REQUIREMENT
Before beginning this procedure, make sure you have opened Router Manager
Configurator (see
page 60 ).