Troubleshooting, Nvision, Nvision ethernet protocol - enterprise router – Grass Valley iRouter v.6.01 User Manual
Page 49: Router protocols that nv9000 supports

iControl Router
User Guide
45
This protocol is also supported over IP. The default port is 2000, but it may be configured to
something else. If the switcher does not have an Ethernet port, you can use the Pro-Bel Babel
Fish box:
Troubleshooting
If you want to troubleshoot the SW-P-02 over IP connection, use the following Pro-Bel tools:
•
HU-Babelfish Internal Protocol Conversion V03.pdf
•
IPConfigurationTool V4.00.zip
•
swp02_test.zip
NVISION
NVISION Ethernet Protocol - Enterprise Router
NVISION Enterprise routers use TCP/IP to communicate with external devices. The port must
be 9193. You also need to specify the NVISION controller's host name or IP address when
configuring it in Router Manager.
To configure the NVISION controller, you must match the iControl Router frame ID with the
unique ID of the router defined in the NVISION configuration. Also, the iControl router logical
levels should match the levels defined in the NV9000 configuration.
Router Protocols that NV9000 Supports
The NV9000 router controller supports any of the following router protocols:
• Utah RCP-1
• Jupiter ESbus
• GVG Horizon TCI
• Snell (Pro-Bel) SW-P-02
• Snell (Pro-Bel) SW-P-08
• Pesa
• ISIS Serial
• Datatek D-2815 Serial
• Sony CART+ Serial