Grass Valley iRouter v.6.01 - Manual (Page 70)

Configuration Interface
Adding Physical Routers
66
5. In the Router protocol list, select a protocol.
6. Click Help to review information about the selected protocol.
7. Under Connection type, select Serial, TCP/IP, or UDP, as appropriate for the selected
protocol.
The Communication parameters zone varies according to the selected connection type,
as follows:
Figure 4-1: Communications settings for a serial connection
IMPORTANT: Naming Restrictions
Do not use special characters in the router name. Spaces are allowed.
Note: Presently, there are several protocols for which online help is unavailable.