Grass Valley iRouter v.6.01 - Manual (Page 31)

iControl Router
User Guide
27
Toggling to a Matrix View from Another Operational Window
Perform this procedure to toggle to an existing Matrix View from another iControl Router
window.
To toggle focus to an existing Matrix View
• In a Single Bus window, on the Window menu, click the desired Matrix View selection.
Opening the Single Bus Window
Opening the Single Bus Window
To open the Single Bus window
• In the Matrix View, on the New menu, click Single bus.
Alternatively, in the case where you are beginning from the Router Status window, you
may also click the router level corresponding to the appropriate source.
REQUIREMENTS
Make sure you meet the following conditions before beginning this procedure:
• You have a Single Bus window open and in focus (each associated with the appropriate
router).
• A Matrix View for the appropriate router is open.
See also
For more information about the Single Bus window, see page 6 .
REQUIREMENT
Before beginning this procedure, make sure you have opened the Matrix View associated
with the appropriate router (see
page 24 ).