Adding physical routers – Grass Valley iRouter v.6.01 User Manual
Page 68
Configuration Interface
Adding Physical Routers
64
Adding Physical Routers
To add a physical router
1. In Router Manager Configurator, on the Configuration tab, select the router manager
folder (named RouterManager in the graphic, below), and then click Open.
2. Select the Physical Routers folder.
Note: Although it is possible to perform the following procedure as a stand-alone
task (assuming all stated requirements are met), Miranda recommends you
familiarize yourself with the sample workflow on
page 60
in which this procedure is
only one step within a sequence.
REQUIREMENT
Before beginning this procedure, make sure you have opened Router Manager
Configurator (see
).
This manual is related to the following products: