Grass Valley iRouter v.6.01 - Manual (Page 6)

Introduction
User Interfaces Available with iControl Router Software
2
User Interfaces Available with iControl Router Software
Configuration Interface
The configuration interface, called iControl Router Configurator, is used for router setup and
configuration. Use this application to define physical and logical routers.
Operating Interface
The operating interfaces called Matrix View and Single Bus are client applications used to
monitor and control the logical routers that you defined in iControl Router. They are available
from the iControl Router Control Web page.
Term Description
Physical Router A physical router represents the connection to your existing router (RS-232/422 or TCP). Configure one
physical router for each device you wish to control from the iControl Router software.
Logical Router A logical router represents an entire physical router, or a subset of a physical router. The operating
interfaces handle logical routers.
For instance, if you configured one 16 × 16 physical router, you can create two 8 × 8 logical routers with
levels 0 and 1.
See also
For more information, see "Configuration Interface" on page 59.
See also
For more information, see "Operating Interface" on page 3.