Grass Valley iRouter v.6.01 - Manual (Page 80)

Configuration Interface
Adding Aliases for your Physical Input Ports
76
To add an alias for an input or destination port
1. In Router Manager Configurator, in the navigation pane, click the level of the physical
router to which you would like to add an alias.
Information about the selected level appears in the right pane, including labels and aliases
for sources and destinations.
IMPORTANT: Risk of Deleting Router Configuration Data
If, after adding aliases in iControl Router, you decide you would like to import
router configuration data in which there is a physical router with the same name
as one of your own in iControl Router, the alias data for that router will be over-
written.
Notes
• If you would like to add aliases, you may either create your own or import
them from an NVISION router configuration.
• In iControl Router Web, you may create alarm consumer plug-ins that are
triggered by the alarms of aliases.
REQUIREMENTS
Make sure you meet the following conditions before beginning this procedure:
• You have opened Router Manager Configurator (see page 60 ).
• The physical router and level to which you would like to add an alias is visible in the
navigation pane of the Router Manager Configurator.