Grass Valley iRouter v.6.01 - Manual (Page 71)

iControl Router
User Guide
67
Figure 4-2: Communications settings for a TCP/IP connection
Figure 4-3: Communications settings for a UDP/IP connection
8. In the Communications parameters area, specify all required information, or click Use
protocol defaults to apply the selected protocol’s default communication settings.
9. Click Save at the top of the left pane.
Importing an NVISION Physical Router Configuration
Notes
• The collection of protocol-specific information, that you can read by clicking
Help for each protocol, can also be found at the end of this manual
(see
"Routing Switchers Tips and Tricks" , on page 33).
• The RS-232 baud rates for Network routers differ from model to model.
Although the standard value is 19200, you should refer to your router’s user
manual to verify the appropriate value for your specific model.
IMPORTANT: Risk of Deleting Router Configuration Data
If, after adding aliases, you are importing router configuration data in which
there is a physical router with the same name as one of your own in iControl
Router, the alias data you configured for that router will be overwritten.