Modifying physical router configurations – Grass Valley iRouter v.6.01 User Manual
Page 82
Configuration Interface
Modifying Physical Router Configurations
78
An empty alias column appears to the far-right side of the label area.
Modifying Physical Router Configurations
To modify a physical router’s configuration
1. In Router Manager Configurator, in the router manager folder, double-click the Physical
Routers sub-folder.
Note: Although it is possible to perform the following procedure as a stand-alone
task (assuming all stated requirements are met), Miranda recommends you
familiarize yourself with the sample workflow on
page 60
in which this procedure is
only one step within a sequence.
REQUIREMENT
Before beginning this procedure, make sure you have opened Router Manager
Configurator (see
).
This manual is related to the following products: