Grass Valley GV STRATUS Installation v.3.1 - Manual (Page 466)

4. Work through wizards and set deployment options for GV STRATUS software as follows:
Deployment options Software
The account must be the internal system account, which by default is
GVAdmin. It is advisable to enter it as
.\accountname where the "." means
a local account. Entering the local account in this way allows you to use the
Use options from feature for all other devices of the same type. Once you
enter the local account in this way on the first device, it becomes the template
from which options for other devices are copied.
GrassValley_STRATUS_ConformService
GrassValley_STRATUS_CoreServices
GrassValley_STRATUS_DataMover
GrassValley_STRATUS_DIVA_MDI
GrassValley_STRATUS_FlashNet_MDI
GrassValley_STRATUS_GFTP_MDI
GrassValley_STRATUS_HttpProxyServer
GrassValley_STRATUS_MediaFlow
GrassValley_STRATUS_Proxy_Encoder
GrassValley_STRATUS_Rules
GrassValley_STRATUS_Summit_MDI
GrassValley_STRATUS_TrafficGateway
GrassValley_STRATUS_Transcode
5. If you have multiple devices of the same type, you can enter deployment options for one of them
using the wizard. Then, when you bring up the same wizard on every device, you can choose
the
Use options from radio button and select the first device for which you set options.
SiteConfig copies the options you set for the first device and fills in the blanks on the wizard.
Installing software on a Workflow Server
Only systems with one or more GV STRATUS servers that are Workflow Servers require this
process. Use SiteConfig to install software on the Workflow Servers.
Prerequisites:
• The server on which you are installing software is in the SiteConfig system description and
communicating on the control network.
• The server on which you are installing software has its credentials set in SiteConfig to allow
access.
466 GV STRATUS Installation and Service Manual 2013 12 19
Complete system set up and configuration