Set rmi pc to high-resolution – Grass Valley GV STRATUS Installation v.3.1 User Manual
Page 265
3. From the ENPS folder, select
System Maintenance | MOS Configuration | New
and create a new
MOS entry with these parameters:
The MOS ID; this value is case sensitive and must match the MOS ID
configured in the XMOS Server Options.The recommended format is
use station call letters for location and station group abbreviation for
enterprise.
ID
GV STRATUS
Description
The IP address or host name of the machine hosting the SDB Server and
the XMOS Server.
IP
GV.STRATUS.1
ActiveX
Leave blank. These settings are configured during installation.
Default Settings
The group ID that had been configured in
System Maintenance | Groups
.
Program
2.6 or 2.8.2
MOS Version
Off
Local DragDrop
On
Auto Create
On
Story Send
4. From the ENPS folder, select
System Maintenance | Global Configuration Options
, add a new
property named
AddMOSObjDuration
and set its value to
1
.
NOTE:
AddMOSObjDuration
is the optional setting that allows the duration of clips to be
automatically included in the rundown timing. If you prefer to manually enter the duration
of your story and clips, do not activate this setting.
5. Add
mp4
to the
MOSBrowseMediaExtensions
property, as can be seen below:
MOSBrowseMediaExtensions=bmp,jpg,jpeg,mp4,3gp,wmv,wav,sdp,ts
6. Restart the ENPS client application.
Set RMI PC to high-resolution
A GV STRATUS client PC on which you use the RMI tool must meet the following requirements:
•
The PC must be an iSCSI/SNFS client to a K2 SAN.
•
The PC must be set to high-resolution in GV STRATUS Control Panel Proxy Access settings.
2013 12 19
GV STRATUS Installation and Service Manual
265
Administering and maintaining the GV STRATUS system