Grass Valley GV STRATUS Installation v.3.1 - Manual (Page 24)

Commissioning process
Use the following list to guide the overall task flow of commissioning your system. This
commissioning process assumes you received your system completely set up and configured from
Grass Valley.
1. Rack, cable, and power on process on page 27. All systems require this process.
2. Test system setup and configuration process on page 40. All systems require this process. Verify
that your cabling is correct, the system is operational as when pre-staged by Grass Valley, and
to complete procedures by logging in to all devices and applications as user
Administrator
with password adminGV! .
3. Customer network, licenses, and roles process on page 44. All systems require this process. Set
up the GV STRATUS Core server on the customer's network and assign GV STRATUS licenses
and roles to the customer's groups and users.
4. Client PC set up process on page 46. All systems require this process. Add the customer's GV
STRATUS client PCs to the system.
Complete system installation process
Use the following list if you must change the system configuration or if there are system setup or
configuration processes that are incomplete. Browse this process and do the appropriate items.
1. Rack, cable, and power on process on page 27. All systems require this process.
2. K2 system set up process on page 318. All systems require this process.
3. Express/Core server set up process on page 320. All systems require this process. Use SiteConfig
for network setup and software install. On the GV STRATUS server with role of Common
Services, use SabreTooth and install GV STRATUS licenses.
4. Proxy Server/Storage set up process on page 329. Only systems with proxy on the K2 SAN (A1)
or with proxy on dedicated Proxy Storage (B1, C1) require this process. Use SiteConfig for
network setup and software install, then use K2Config for SAN setup.
5. GV STRATUS Control Panel system configuration process on page 357. All systems require this
process. Use GV STRATUS Control Panel to configure the GV STRATUS system for your site's
workflow.
6. Customer network, licenses, and roles process on page 44. All systems require this process. Set
up the GV STRATUS Core server on the customer's network and assign GV STRATUS licenses
and roles to the customer's groups and users.
7. Client PC set up process on page 46. All systems require this process. Add the customer's GV
STRATUS client PCs to the system.
8. SiteConfig software deployment process on page 374. All systems require this process when
updating to new versions of Grass Valley product software.
24 GV STRATUS Installation and Service Manual 2013 12 19
Preparing for installation