Grass Valley GV STRATUS Installation v.3.1 - Manual (Page 43)

Test required GV STRATUS configuration settings
All systems require this process.
Whether you received your system pre-configured from Grass Valley or you configured your system
on site, you should test the system operation before proceeding.
GV STRATUS client test
Do this for all systems. Whether you received your system pre-configured from Grass Valley or
you configured your system on site, you should test the GV STRATUS application from one GV
STRATUS client PC before proceeding.
In the GV STRATUS application, do the following:
a) In the Navigator, verify access to K2 Summit system bins.
b) Create a Channel Panel and test record/play operations.
c) In the Navigator, select assets on the K2 Summit system.
The assets appear in the Asset List.
d) Double-click an asset in the Asset List.
The asset opens in the Inspector.
e) In the Inspector, verify that the asset has a proxy association.
Related Topics
Identify test applications and setup on page 41
GV STRATUS proxy encoding test
Do this for all systems with Proxy Encoders. Whether you received your system pre-configured
from Grass Valley or you configured your system on site, you should test the proxy encoding from
one GV STRATUS client PC before proceeding.
1. In the GV STRATUS application, identify a high-resolution asset and do the following:
a) In the Navigator, select the high-resolution asset on the K2 Summit system.
The asset appears in the Asset List.
b) Double-click the asset in the Asset List.
The asset opens in the Inspector.
c) In the Inspector, verify that the asset has a proxy association.
2. In the Asset List, right-click the high-resolution asset and select Regenerate Proxy .
3. Verify the following behavior:
a) In the Inspector, the proxy association is momentarily not visible.
This occurs as the GV STRATUS system deletes the proxy asset.
b) In the Inspector, the proxy association becomes visible again.
This occurs as the Proxy Encoder creates the proxy asset.
2013 12 19 GV STRATUS Installation and Service Manual 43
Commissioning a system