Grass Valley GV STRATUS Installation v.3.1 - Manual (Page 115)

Description Setting or button
Specifies either SAN-attached K2 Summit system or Standalone K2
Summit system. When Standalone is selected, settings are as follows. Type of K2 device
The name or IP address of the remote K2 Standalone client. Select K2 Standalone
The maximum number of concurrent transfers allowed. The maximum
is set in K2Config. You may select the maximum or a lesser number.
Refer to your system design. Maximum concurrent
transfers
The user name to access the remote K2 Summit system. This is the
internal system account, which by default is GVAdmin. User Name
If on a domain, the domain that manages the account that accesses the
remote K2 Summit system. Domain
The password to access the remote K2 Summit system. For GVAdmin
the default password is
adminGV! .
Password
The FTP server name for the remote K2 Summit system. Typically this
is the name of the standalone K2 Summit system with the
_he0 suffix
added.
FTP Server Name
The FTP user name for the remote K2 Summit system. Typically this
is
movie .
FTP User Account
The FTP password for the remote K2 Summit system. FTP Password
2013 12 19 GV STRATUS Installation and Service Manual 115
Reference to GV STRATUS Control Panel settings