Grass Valley GV STRATUS Installation v.3.1 User Manual
Page 341
Prerequisites for initial configuration - Basic Proxy Storage
Before beginning your initial configuration, make sure the devices of the Proxy Storage system meet
the following prerequisites.
Control point PC
•
Ethernet cable connected
•
Control Point software installed
•
Control network IP address assigned
•
Network communication over the control network with all other K2 devices
•
Power on
Ethernet switch
•
Ethernet cables connected
•
Control network IP address assigned
•
VLANs set up
•
Trunks set up
•
Power on
Core Services server
•
Ethernet cables connected
•
Fibre Channel cable connected
•
Software installed, as from the factory, including QuickTime 7
•
Control network IP address assigned
•
Power on for all servers
K2 RAID chassis
•
Fibre Channel cable(s) connected
•
Ethernet cable(s) connected
•
Power on
K2 RAID Expansion chassis (optional)
•
Fibre channel cable(s) connected
•
Power on
2013 12 19
GV STRATUS Installation and Service Manual
341
Complete system set up and configuration