Grass Valley HD Wireless - Manual (Page 85)

HD Wireless User’s Guide (v6.2) 85
Chapter 9 - Installing the Video booster
9.3 Output power
The HD Wireless Camera Adapter has an internal digital attenuator. It allows you to reduce RF
output power to a value that is sufficient for your particular operating conditions. Maximum
power is not always needed and it is good practice to reduce output power to the minimum
required to reduce exposure and possible interaction between adjacent cameras.
To reduce the RF output power level set the EXT. BOOST ADJUST in the
INSTALL > WIRELESS menu of the camera to a value greater than 0. Each time this parameter
is increased by 2, the RF output power level is decreased by 1 dB with respect to its nominal
value.