5 wcu audio menu, 6 wcu intercom menu – Grass Valley HD Wireless User Manual
Page 48
48
HD Wireless User’s Guide (v6.2)
Chapter 4 - Setting up
4.4.5 WCU audio menu
Select 1 or 2 audio channels, audio output level and delay
1.
The number of audio channels can be selected in the menu of the WCU:
Menu path: AUDIO_INTERCOM
>
AUDIO
>
AUDIO
MODE
2.
Set the audio output level to enable (+6 dB) or to disable (0 dB):
Menu path: AUDIO_INTERCOM
>
AUDIO
>
AUDIO
LEVEL
1(2)
3.
The audio delay function delays the audio signal so that it is synchronised with the video
signal.
Menu path: AUDIO_INTERCOM
>
AUDIO
>
DELAY
4.4.6 WCU intercom menu
Select a 2-wire or a 4-wire system
1.
Depending on the intercom wiring set the wire mode for the Eng and Prod intercom
channels to 2wires or 4wires.
Menu path: AUDIO_INTERCOM
>
INTERCOM
>
ENG
>
WIRE
MODE
Menu path: AUDIO_INTERCOM
>
INTERCOM
>
PROD
>
WIRE
MODE
Select channel input level
1.
For each intercom channel you can enable (+6 dBU) or disable (0 dBU) the level.
Menu path: AUDIO_INTERCOM
>
INTERCOM
>
ENG
>
LEVEL
Menu path: AUDIO_INTERCOM
>
INTERCOM
>
PROD
>
LEVEL
Menu path: AUDIO_INTERCOM
>
INTERCOM
>
PROG
>
LEVEL
Select intercom output level
1.
Adjust the output level as required.
Menu path: AUDIO_INTERCOM
>
INTERCOM
>
ENG
(PROD)
>
OUT
REF
LEVEL
Adjust 2-wire balance
1.
Set local side tone in the camera to zero.
Camera system menu path: INSTALL
>
INTERCOM
>
SIDE
TONE
2.
Adjust the output level to minimize the feedback from the headset microphone to the
headset muff.
WCU menu path: AUDIO_INTERCOM
>
INTERCOM
>
ENG
(PROD)
>
2W
BALANCE
3.
Reset the local side tone in the camera to a comfortable value.