Grass Valley HD Wireless - Manual (Page 63)

HD Wireless User’s Guide (v6.2) 63
Chapter 5 - Menu contents
5.3 Camera install menu for WCA
Only the WCA install menus are expanded in this table. Refer to the user’s guide of your HD
camera for detailed information on the other menu items.
Install Values Description Level File
[...]
Wireless User 3
Camera number 0..99 (1) Selects camera number. User 1 Oper
Data Freq (MHz) 454.00 .. 462.00 MHz Selects data frequency in 50 kHz steps. User 3 -
Video Freq (GHz) 2.030 .. 2.198 GHz, 
2.203 .. 2.398 GHz or 
2.503 .. 2.683 GHz
Selects video frequency (within the
selected range) in 1 MHz steps. User 3 -
Ext. Boost Adjust 0..12 (0) Sets the RF power attenuation for the
external video booster. With each
increment of 2, power level is decreased by
1 dB. User 3 -
Tx Profile
In/Outdoor Indoor, Outdoor Selects environment profile. Tip: try Indoor
setting first (even in outdoor situations).
Switch to Outdoor if the RF link is still weak
even in HiR mode. User 3
Q_Robustness HiQ, Std, HiR Selects quality/rubustness trade-off
HiQ = high quality;
Std = standard;
HiR = high robustness. User 3
Q_Latency Std, Q+(H)/Q+(V), Q+(T) Selects quality/latency trade-off.
Std = standard low latency;
Q+(H), Q+(V) = medium latency;
Q+(T) = high latency. User 3