Grass Valley HD Wireless User Manual
Page 51
HD Wireless User’s Guide (v6.2)
51
Chapter 4 - Setting up
TRIAX 2 OK / SELECTED
These indicators operate in the same way as for Triax input 1 above.
VIDEO CHANNEL (rotary switch not used)
DATA CHANNEL (rotary switch not used)
VIDEO PARAMS (rotary switch not used)
PC COM
Connector for attaching a PC to the WCU.
CAM LOCK
Reflects the status of the internal genlock (Camera/WCU).
☞
Note
The camera must be locked to the WCU even if the WCU is not locked to the studio reference
signal.
EXT REF.
When ON this light indicates the presence of a correct external sync signal on the GEN
LOCK connector of the WCU. Otherwise it is off or flashing.
Reflects the status of the internal genlock (Camera/WCU).
FREEZE
When ON, this light indicates that Freeze is activated due to an interrupted video
connection. This means that the latest correct image that was received is stored into
memory and is output until the video connection is restored.
Cam Lock (Green) Message
On
Camera is locked on WCU.
Off
Camera is not locked on WCU (check data link).
Cam Lock (Green) Message
On
Studio reference signal is detected and is consistent with the selected video mode.
Off
Studio reference signal is not detected (WCU is free running).
Flashing (~5/s)
Studio reference signal is detected but is not consistent with the selected video
mode (WCU is not locked on studio).