Grass Valley HD Wireless - Manual (Page 59)

HD Wireless User’s Guide (v6.2) 59
Chapter 5 - Menu contents
5.2.6 WCU Files menu
VideoMode 720p50, 720p59, 1080i50,
1080i59 Selects video mode if the camera is not
connected. install -
Wireless
MOD802.16 Test On, Off Turns MOD802.16 test on or off. Warning:
this mode is for service purposes only! service -
VideoFreqRangeSelect Auto, Manual Auto: frequency range is taken from
detected down-converters.
Manual: frequency range is forced. install
VideoFreqRange 2.0-2.2, 2.2-2.4, 2.5-2.7 Allow to impose video frequency range
when VideoFreqRangeSelect = Manual.
Otherwise (Auto) it displays the detected
Frequency Range. install
Video Frequency 2.030 .. 2.195 GHz or
2.203 .. 2.398 GHz or
2.503 .. 2.683 GHz Selects video frequency (within the
selected video range) in 1 MHz steps. install
DataFreqRange 454-462 MHz Selects data frequency range. Note: this
setting is fixed to 454-462 MHz
Data Frequency 454.00 .. 462.00 MHz Selects data frequency in 50 kHz steps. install
Rx Profile
In/Outdoor Indoor, Outdoor Selects environment profile. Tip: try Indoor
setting first (even in outdoor situations).
Switch to Outdoor if the RF link is still weak
even in HiR mode. install -
Q_Robustness HiQ, Std, HiR Selects quality/robustness trade-off
HiQ = high quality;
Std = standard;
HiR = high robustness. install -
Q_Latency Std, Q+(H)/Q+(V), Q+(T) Selects quality/latency trade-off.
Std = standard low latency;
Q+(H), Q+(V) = medium latency;
Q+(T) = high latency. install -
TempUnit C, F Temperature indication unit install -
Menu item Values Description Level File
Menu item Values Description Level File
User Operator Files
Operator File 1..4 (1) Selects user operator file to use. Oper -
Recall exec Recalls the selected user operator file. Oper -
Store exec Stores the selected user operator file. Oper -
Std. Operator Files
Operator File Cust, Fact Selects standard operator file to use:
customer or factory. Oper -
Recall exec Recalls the selected standard operator file. Oper -