Grass Valley HD Wireless - Manual (Page 76)

76 HD Wireless User’s Guide (v6.2)
Chapter 7 - Specifications
7.1.1 Wireless RF module (LDK 5466/xx, attached to WCA)
7.1.2 HD RF DATA CAM MODULE (LDK 5465/20, attached to WCA)
Bitrate (depending on selected profile)
Out / Q_R = HiR : 31.4 Mb/s
Out / Q_R = Std : 47.0 Mb/s
Out / Q_R = HiQ : 55.8 Mb/s
In / Q_R = HiR : 37.2 Mb/s
In / Q_R = Std : 49.7 Mb/s
In / Q_R = HiQ : 66.4 Mb/s
Intercom Speech quality; latency to camera 100 ms
Microphone level -44 to -24 dBu switchable
Input impedance > 10 k

Telephone level +12 dBu nominal
Telephone output impedance < 50

Audio 1 channel full bandwidth (22 kHz, S/N 63 dB typical) or
2 channels reduced bandwidth (15 kHz, S/N 60 dB typical)
Input impedance > 10K
 Sensitivity range: -64 to -22 dBu or line
(0 dBu)
Tally out On: +2.2 VDC; Off: 0 VDC (LVTTL levels). User MUST limit the current
to 10 mA. max.
Applicable standards Radio: ETS 300 440
External video 1.0 Vpp (C)VBS input
Item Value
Item Value
Antenna TX antenna, SMA connector, RF signal output
Frequency ranges depending on module:
LDK 5466/20 : 2.030 .. 2.195 GHz or
LDK 5466/22 : 2.203 .. 2.398 GHz or
LDK 5466/25 : 2.503 .. 2.683 GHz
Emitted power (Video mode = 50 Hz) 16 dBm < P < 18.5 dBm (conducted) measured at T
ambient
= 20° C;
ACP > 37.5 dB
Emitted power (Video mode =
59.94 Hz) 14 dBm < P < 16.5 dBm (conducted) measured at T
ambient
= 20° C;
ACP > 43.5 dB
Applicable standards Radio: ETSI EN 300 440, EN 302 064
Item Value
Antenna RX antenna, BNC connector, RF signal output
Modulation FSK
Sensitivity < -93 dBm
Saturation > 10 dBm