Grass Valley HD Wireless - Manual (Page 42)

42 HD Wireless User’s Guide (v6.2)
Chapter 4 - Setting up
The following table summarizes supported choices:
Select audio gain mode
Audio gain control can be achieved in two ways: either locally through the system menu of the
camera head or by an externally applied voltage applied to the back panel of the WCU
(signalling connector, see Audio gain (external) on page 32.)
1. The source of control can be selected in the system menu of the camera head.
2. Menu path: INSTALL > AUDIO > AUDIO GAIN MODE
Select audio gain (locally)
1. The local audio gain is set in the system menu of the camera. In the Install menu go to
the Audio submenu where you can set the gain for both channels.
Menu path: INSTALL > AUDIO > AUDIO 1(2) LEVEL
Adapter XLR socket Camera XLR socket
AUDIO
1(2)
SOURCE
Source
Level
range Phantom
power
Source
Level
range Phantom
power
Line Enabled Fixed 0 dBu No Disabled N/A No
Mic Enabled Variable
(Mic levels) No Disabled Variable
(Mic levels) No
Mic48 Enabled Variable
(Mic levels) Yes (48 V) Disabled Variable
(Mic levels) No
Front Disabled N/A No Enabled Variable
(Mic levels) Yes (48 V)